Anker SOLIX C1000 Gen 2 Solar Generator Kit (2000W / 1024Wh) + 200W Solar Panel

Rent the absolute gold standard in mobile, clean energy. This listing is for the brand-new, upgraded Anker SOLIX C1000 Gen 2 Portable Power Station paired with the official Anker 200W Folding Solar Panel.

This system delivers massive, heavy-duty power in an ultra-portable suitcase size. It is 100% gasoline-free, emissions-free, and runs completely silent. It is fully compliant with all BC regional park noise bylaws and strict summer campfire bans, making it perfect for off-grid use.

🔋 WHAT IT CAN POWER:
Equipped with a beefy 2000W continuous pure sine-wave output (3000W peak surge power), this unit safely handles 99% of appliances and electronics. It is ideal for:
• Outdoor weddings, mobile DJs, and live sound systems.
• Indie film sets, location shooting, video villages, and camera battery charging stations.
• Backyard movie night projectors, strings of string-lights, and tailgating.
• Off-grid camping

Instructions

5-MINUTE QUICK-START GUIDE

Turn On: Press and hold the circular Main Power Button under the LCD screen for 1 second. The display reveals the battery percentage.
Activate Plugs: Plug your cords into the outlets. Hold down the physical AC Control Switch next to the outlets until its green LED lights up. Power will not flow unless this light is on.
Set Up Solar: Unfold the 200W solar array. Adjust the built-in kickstands to face the sun directly at a 45-degree angle. Plug the black and yellow XT60 solar cable into the input port on the back of the Anker battery.

DIAGNOSTIC TROUBLESHOOTING

Screen is on, but no power out: Make sure the green LED next to the AC button is glowing. If using USB, ensure cables are fully flush.

Solar charging is very low: Check for partial shadows. Even a tiny shadow from a chair leg on a single panel segment drops efficiency drastically.

Unit is beeping: Overload safety triggered. Unplug all devices, turn the main unit off and on, reset the AC button

Return requirements

COMPONENT RETURN CHECKLIST

Verify all five pieces are in the transport bag before returning:

1. Anker SOLIX C1000 Gen 2 Core Battery Unit

2. Anker 200W Folding Briefcase Solar Panel

3. AC Wall Charging Cable

4. XT60 Solar Connection Link

5. Weather-Resistant Accessory Protection Bag

🧽 Mandatory Cleaning & Return Condition Requirements
To protect our high-end equipment renters must return the equipment in the following condition:

Wipe Down the Chassis: Use a dry or slightly damp microfiber cloth to remove any dust, mud, campsite dirt, or grass stains. Never spray cleaning chemicals or liquids directly onto the ports or vents.

Clear the Vents: Ensure the fan intake grilles on the sides are free of loose debris.

Wrap the Cables: Do not throw loose cords into the bag. Wrap the AC wall cord and the solar XT60 cable neatly using their velcro straps to prevent bending or damage.

Dry Equipment Only: If it rained during your event, wipe all components completely dry before packing.

There are no reviews yet