This is a DeWalt 20V MAX cordless circular saw in good used condition. It features the standard yellow and black design, a 7-1/4” blade, ergonomic handles, and a sturdy metal base plate. Ideal for cutting lumber, plywood, and other sheet materials on job sites or DIY projects. Battery and charger are not included. Ready for rental.

Instructions

Safety First: Wear safety glasses, hearing protection, and a dust mask. Use both hands. Secure your workpiece and ensure it is well supported so the cut-off piece falls freely. Remove battery before adjustments.
Setup:
1. Insert a charged 20V MAX battery until it clicks.
2. Set depth: Blade should protrude ¼”–½” below material.
3. Adjust bevel if needed using the lever.
4. Check blade is sharp and guard moves freely.
Cutting Steps:
1. Mark cut line clearly.
2. Place shoe on workpiece with blade aligned to waste side.
3. Hold lock-off button, squeeze trigger, and let blade reach full speed.
4. Push saw steadily forward, keeping shoe flat. Let the tool do the work.
5. Release trigger at end of cut and wait for blade to stop before lifting.
Tips: Use a guide for straight cuts. Support material properly to avoid kickback. Clean tool after use. Battery and charger not included.
Practice on scrap first. Follow these steps for safe, accurate cuts in lumber and sheet materials.

Return requirements

Return Guidelines for DeWalt 20V MAX Cordless Circular Saw
Please return the tool in clean, usable condition to avoid extra cleaning or damage fees.
Before Returning:
1. You may leave the rented 20V MAX battery attached to the saw or remove it — either is fine.
2. Brush or blow out all sawdust and debris from the blade guard, vents, motor housing, and base plate using compressed air or a soft brush.
3. Wipe the metal shoe, handles, and body with a dry or slightly damp cloth. Do not use harsh solvents or immerse in water.
4. Inspect the blade: remove heavy resin buildup if possible. Return the blade that came with the tool (minor wear is expected).
5. Ensure the lower blade guard moves freely and returns to the closed position.
6. Check for any damage, loose parts, or bent shoe. Report issues immediately upon return.
Important:
• Do not return a wet or damp tool.
• Return in the original rental case if provided.
• Fully charge any batteries you used before returning them

There are no reviews yet